manualshive.com logo in svg

Aficio 3228C, Operating Instructions Manual

Share
Download
Aficio 3228C Operating Instructions Manual Download Page 159

Where to Put Your Machine

147

6

• Close all covers and trays, in-

cluding the front cover and by-
pass tray.

❒

Move the machine carefully. If you
do not, it could result in damage
and stored files might be lost.

❒

Do not take off the holding stand.

❒

Protect the machine from strong
shocks. Impact can damage the
hard disk and cause stored files to
be lost. As a precautionary meas-
ure, files should be copied to an-
other computer.

Power Connection

R

 

WARNING:

R

 

CAUTION:

R

 

CAUTION:

• When the main power switch is in

the stand-by position, the optional
anti-condensation heaters are on.
In an emergency, unplug the ma-
chine's power cord.

• When you unplug the power cord,

the anti-condensation heaters turn
off.

• Make sure the plug is inserted

firmly in the wall outlet.

• Voltage must not fluctuate by

more than 10%.

• The wall outlet shall be installed

near the machine and shall be eas-
ily accessible.

Access to the Machine

Place the machine near the power
source, providing the clearance areas
shown.

1.

Rear: more than 10 cm (4")

2.

Right: more than 55 cm (21.7")

3.

Front: more than 70 cm (27.6")

4.

Left: more than 46 cm (18.2")

Note

❒

For the required space when op-
tions are installed, contact your
service representative.

•

Connect the machine only to 
the power source described 
on the inside front cover of 
this manual. Connect the pow-
er cord directly into a wall out-
let and do not use an 
extension cord.

•

Do not damage, break or make 
any modifications to the pow-
er cord. Do not place heavy 
objects on it. Do not pull it 
hard nor bend it more than 
necessary. These actions 
could cause an electric shock 
or fire.

•

Unplug the power cord from the 
wall outlet before you move the 
machine. While moving the ma-
chine, you should take care that 
the power cord will not be dam-
aged under the machine.

•

When you disconnect the power 
plug from the wall outlet, always 
pull the plug (not the cable).

AAE004S

JupiterC2_GSG_GB_F2_Pre_FM.book  Page 147  Wednesday, November 10, 2004  11:12 AM

Summary of Contents for 3228C































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands