Aficio 3228C, Operating Instructions Manual

Page: 818 / 1150

Administrator Setting
184
9
Programming/changing Information
Boxes
This section describes how to set up
an Information Box.
You can store the following items:
• Box name (required)
Up to 20 characters long
• SEP Code (required)
Up to 20 characters long and can be
composed of digits 0-9, “#”, “*”,
and spaces (the first character can-
not be a space).
• Password (optional)
Up to 20 characters long and can be
composed of digits 0-9, “#”, “*”,
and spaces (the first character can-
not be a space).
When programming a password, a
mark is displayed before the Box
name.
Note
❒
You can edit boxes in the same
way you program them. However,
to change the SEP Code itself, you
must delete the box, and then pro-
gram a new SEP Code.
❒
If a destination in the destination
table is deleted after being regis-
tered, delivery is not performed
and the settings of the delivery
destination are also deleted. Also,
when a delivery destination is
changed, a message is sent to the
changed destination. If there is no
destination of the specified type,
you can set a certain destination to
be priority quoted. See p.166 “User
Parameters” (switch 32, bit 0).
Reference
p.42 “Information Boxes”
AAAA
Press the
{{{{
User Tools/Counter
}}}}
key.
BBBB
Press [ Facsimile Features ] .
CCCC
Press [ Administrator Tools ] .
DDDD
Press [ Box Setting ] .
EEEE
Check that [ Program / Change ] is se-
lected.
FFFF
Select the box to program.
When programming a new box,
press
[ * Not Programed ] .
Note
❒
To change a box already pro-
grammed, press it, and then
proceed to step
I
. If a password
has been programmed, enter
the password, press
[ OK ] , and
then proceed to step
I
.
GGGG
Press
[ Information Box ]
.
HHHH
Enter a box name, and then press
[ OK ] .
Reference
“Entering Text”, General Set-
tings Guide
FaxAdAE_Chapter-9 Page 184 Monday, December 20, 2004 1:23 PM