Aficio 3228C, Operating Instructions Manual

Page: 684 / 1150

Other Transmission Features
50
4
Note
❒
If you use Immediate Transmis-
sion and the fax machine at the
destination does not support
the SUB Code function, a mes-
sage will appear on the display
to inform you of this. When this
happens, press
[ OK ]
to cancel
the transmission.
SID Code
There are times when you may want
to use an “SID” (Sender ID) when
sending confidential faxes with the
SUB Code function.
Note
❒
The ID can be up to 20 digits long.
❒
You can enter numbers, *, #, and
spaces to program an ID.
❒
You can store IDs in destination
lists and Programs. See p.129
“Registering and Changing Key-
stroke Programs”. See “Fax Desti-
nation”,
General Settings Guide .
❒
Messages you send using this
function are marked “SID” on all
reports.
SEP Code
Normally you can only use Polling
Reception to receive faxes from ma-
chines that have the Polling Recep-
t i o n f u n c t i o n a n d t h e s a m e
manufacturer. However, if a machine
of another manufacturer supports
Polling Reception, you can receive fax
messages from the other party using
this method instead.
You can receive messages that have
the same SUB Code as the SUB Code
you entered.
Limitation
❒
A SUB Code cannot be used with
Internet Fax.
Note
❒
The ID can be up to 20 digits long.
❒
Make sure the number of digits in
the ID matches the one set on the
machine to which you are sending.
❒
You can enter numbers, *, #, and
spaces to program an ID.
❒
You can store IDs in destination
lists and Programs. See “Fax Desti-
nation”,
General Settings Guide . See
p.129 “Registering and Changing
Keystroke Programs”.
❒
Messages you receive using this
function are marked “SEP” on all
reports.
❒
This function is not available with
Internet Fax.
AAAA
Enter the fax number of a destina-
tion or an IP-Fax destination.
BBBB
Press [ Adv. Features ] .
CCCC
Press [ SUB Code ] .
DDDD
Press [ RX SEP Code ] .
JupterC2_Fax_AE-F_FM.book Page 50 Monday, December 13, 2004 2:32 PM