Aficio 3228C, Operating Instructions Manual

Page: 649 / 1150

Polling Reception
15
1
❒
Polling Result Report allows you
to verify Polling Reception has tak-
en place. See p.16 “Polling Result
Report”. If E-mail TX Results is
programmed in a Quick Operation
key, you can select whether a re-
port e-mail is sent after reception.
The destination of this report can
be selected from the e-mail ad-
dresses in the destination list.
❒
You can program one of the Quick
Operation keys with operations for
this function. Using the key allows
you to omit step
A
. See p.144 “Gen-
eral Settings/Adjustment”.
AAAA
Press [ Transmission Mode ] .
BBBB
Press [ Polling RX ] .
CCCC
Depending on which method you
are using, select one of the follow-
ing procedures:
Default ID/Free Polling Reception
A
Check that [ Default ID / Free Poll-
ing RX ]
is selected, and then
press [ OK ] .
Note
❒
To cancel Polling Reception,
press
[ Cancel ] . The display
returns to that of step
B
.
ID Override Polling Reception
A
Select
[ ID Override Polling Recep-
tion ] .
B
Specify a 4-digit ID using the
number keys and
[ A ]
,
[ B ]
,
[ C ]
,
[ D ] , [ E ] , and [ F ] , and then press
[ OK ] .
“ID Override: ” and the entered
Polling ID are shown above the
highlighted
[ Polling RX ] .
Note
❒
A Polling ID may be any four
numbers (0 to 9) and charac-
ters (A to F), except 0000 and
FFFF.
❒
If you make a mistake, press
[ Clear ] or the
{{{{
Clear/Stop
}}}}
key
before pressing [ OK ] , and
then try again.
❒
To cancel Polling Reception,
press
[ Cancel ] . The display
returns to that of step
B
.
DDDD
Press [ OK ] .
The standby display appears.
EEEE
Dial, and then press the
{{{{
Start
}}}}
key.
JupterC2_Fax_AE-F_FM.book Page 15 Monday, December 13, 2004 2:32 PM