Aficio 3228C, Operating Instructions Manual

Page: 152 / 1150

Troubleshooting
140
5
Auto Colour Calibration
If a certain colour is strong or the col-
our of the copy differs from the origi-
nal, adjust the yellow, magenta, cyan
and black balance.
Note
❒
If "
D
Toner is almost empty." is
shown on the display panel, the
test pattern cannot be printed.
AAAA
Press the
{{{{
User Tools/Counter
}}}}
key.
BBBB
Press [ Maintenance ] .
CCCC
Press [ Auto Colour Registration ] .
DDDD
Press [ Start ] on the “Copier Func-
tion”.
Note
❒
When performing the auto col-
our calibration from the copy
function, press
[ Start ] under
Copier Function. When per-
forming from the printer func-
tion, press
[ Start ] under Printer
Function.
EEEE
Press [ Start Printing ] and a test pat-
tern will be printed.
Note
❒
When performing the auto col-
our calibration from the printer
function, select test patterns
from
[ 600 x 600 dpi ] , [ 1800
××××
600
dpi ] and [ 1200 x 1200 dpi ] and
then press [ Start Printing ] .
❒
The test pattern will be printed
on an A4
K
, 8
1
/
2
”
×
11”
K
size
page (If A4
K
is not available
then A3
L
, B4 JIS
L
will be
used.). Make sure to check the
paper set in the paper tray.
❒
The counter will not proceed
when the test pattern is printed.
FFFF
Place the test pattern on the expo-
sure glass and press
[ Start Scan-
ning ] .
The image will be corrected after
"
Please wait.
" disappears.
Note
❒
The test pattern will not be read
if it is set in the ADF.
❒
Set the test pattern in the follow-
ing way:
❒
When the ADF is installed, make
sure to set the test pattern on the
exposure glass, and then 2 or 3
white sheets, same size as the
test pattern, above the test pat-
tern.
ZFLS110E
GCCLCPIE
JupiterC2_GSG_GB_F2_Pre_FM.book Page 140 Wednesday, November 10, 2004 11:12 AM