manualshive.com logo in svg

Aficio 3228C, Operating Instructions Manual

Share
Download
Aficio 3228C Operating Instructions Manual Download Page 953

When a Message Is Displayed

93

8

The destination list has been updated. 

Specified destination(s) or sender's 

name has been cleared.    

A specified destination or sender's 
name was cleared when the destina-
tion list in the delivery server was 
updated. Specify the destination or 
sender's name again.

The E-mail address entered is not cor-

rect. Please re-enter.    

Make sure the e-mail address is cor-
rect, and then enter it again.

The entered path is not correct. 

Please re-enter.    

Confirm the destination computer 
and the path, and then enter it again.

The specified group contains some 

invalid destination(s). Do you want to 

select only valid destination(s)?    

The specified group contains some 
destinations for sending by e-mail 
and some destinations for sending 
by Scan to Folder. To select destina-
tions for sending by email, press 

[

Se-

lect

]

 for the message displayed on 

the e-mail screen. To select destina-
tion for sending by Scan to Folder, 
press 

[

Select

]

 for the message dis-

played on the Scan to Folder screen.

Transmission has failed. Insufficient 

memory in the destination hard disk. 

To check the current status, press 

[Scanned Files Status].   

Transmission has failed. There was 
not enough free space on the hard 
disk of the SMTP server, FTP server, 
or client computer at the destination. 
Allocate sufficient space.

Updating the destination list... 

Please wait. Specified destination(s) 

or sender's name has been cleared.   

If a destination or sender's name was 
already selected, re-select it after this 
message disappears.

Updating the destination list has 

failed. Try again?    

Check whether the server is connect-
ed.

You do not have the privileges to use 

this function.

The machine has not been set to al-
low you to use the function. Consult 
an administrator.

Message

Causes and solutions

Summary of Contents for 3228C































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands