3DHISTECH TMA Grand Master 3.2 User Manual Download Page 94

Page: 94 / 116

TMA Grand Master 3.2 – User’s Guide

6 Settings

6 Settinns

Tte Setngs window contains ten panels on wtict functon-related optons can be actvated and
furtter setngs can be modifed.

Overlay

Slide superimpositon setngs can be modifed on tte

Overlay

panel of tte Setngs window.

Select

Auto Search In

Local

Folders

to searct for slide and images directly in local folders you tave

set under tte sectons

Set local Slide folders

Set local imane folders

. Actvate

Auto Search In

CaseCenter

to add results for Overlay functon based on

Folder/Case/Block

and/or

Slide

criteria.

Type in or browse for folder patts for automatc searct (eitter for Slides or images). Folders ttat tave
been set can be displayed afer clicking tte down arrow, and afer you tave selected an item from tte
list, it can be deleted by clicking .

NOTEn

Tte supported image formats are tte following: JPG, PNG, BMP, TIFF, SVS.

August 6, 2020 – Rev. 1

3DHISTECH Ltd.

94(116)

Summary of Contents for TMA Grand Master 3.2





















































































































Search results

Summary of Contents for TMA Grand Master 3.2

Reviews:

Brands by name

Popular brands

3DHISTECH TMA Grand Master 3.2, User Manual

Search results

Summary of Contents for TMA Grand Master 3.2

Reviews:

Brands by name

Popular brands