TMA Grand Master 3.2 – User’s Guide
4 Operating the Main Unit
10. Pull out tte piston, tten told tte front cog wteel frmly and unscrew tte rear cog wteel
(marked witt red) by turning it antclockwise about two turns (360-720 degrees), and now
you are able to remove tte puncter.
Figure 11 – Puncher chuck
11. First, insert tte new piston in tte puncter ctuck, tten insert tte puncter into tte puncter
ctuck matcting tte siize of tte piston. Tigtten tte rear cog wteel, tolding tte front cog
wteel frmly.
12. Insert tte puncter ctuck into its positon and fx it witt tte puncter ctuck locking lever.
Ensure ttat tte two cog wteels (motor and puncter ctuck) are aligned exactly, and move tte
piston into positon making atenton to place tte piston collar to tte groove on tte console.
13. Close tte door of tte tool ctange compartment.
14. In tte pop-up window, select tte diameter of tools you tave placed in and click
OK
.
August 6, 2020 – Rev. 1
3DHISTECH Ltd.
35(116)
