TMA Grand Master 3.2 – User’s Guide
5 Using TMA Grand Master
Important!
Tte table below stows tte maximum number of toles can be drilled into a parafn
block depending on tole siizes:
Paraffin Block Siie (mm)
Hole Siies (mm)
Max. No. of Holes
Color of Drill Bit
37×24
Ø 0.6
16×31 =
558
N/A
Ø 1.0
13×22 =
286
black
Ø 1.5
9×15 =
135
magenta
Ø 2.0
7×12 =
84
blue
Tte selected layout scteme witt layout labeling (if selected) is applied on tte recipient block image.
Tte icon of tte flling directon is presented at tte top lef corner of tte recipient block panel. For
more informaton on layout labeling, see ctapter
6 Settgs – Ltiayout
.
5.2.2 Modifyinn a Recipient Block Layout
1. Open
Layout Editor
window by clicking tte or tte buton next to tte recipient block
image.
2. To modify a block layout, select tte name of tte desired layout from tte drop-down list, tten
click
Edit
.
3. Follow steps 3-8 in secton
5.2.1 Creatitg a recipiett block layout
.
4. Click
Save
.
5. If you do not wist to modify furtter layouts, close window and apply tte actual layout for tte
recipient block by clicking tte arrow at tte rigtt side of tte panel.
August 6, 2020 – Rev. 1
3DHISTECH Ltd.
42(116)
