3Com Switch 8800 Configuration Guide
Chapter 31 MBGP Multicast Extension Configuration
31-11
31.2.14 Resetting BGP Connections
After changing the MBGP policy or protocol configuration, users must disconnect the
present BGP connection to make the new configuration effective.
For details, refer to “BGP Configuration” of the Routing Protocol part of this manual.
31.3 Displaying and Debugging MBGP Configuration
After the above configuration, execute
display
commands in any view to display the
running information of MBGP, and to verify the effect of the configuration.
Execute the
debugging
command in user view for the debugging of MBGP.
Table 31-14
Displaying and debugging MBGP configuration
Operation
Command
Display an MBGP routing table
display bgp multicast routing-table
[
ip-address
[
mask
] ]
Display CIDR (classless inter-domain
routing)
display bgp multicast routing-table cidr
Display the routing information about
the specified MBGP community
display bgp multicast routing-table
community
[
aa:nn |
no-export-subconfed
|
no-advertise
|
no-export
]* [
whole-match
]
Display the routes permitted by the
specified MBGP community list
display bgp multicast routing-table
community-list
community-list-number
[
whole-match
]
Display the routes with inconsistent
source autonomous systems
display bgp multicast routing-table
different-origin-as
Display the routing information to or
from a specified multicast neighbor
display bgp multicast peer
[
peer-address
] [
verbose
]
Display the routing information
advertised by MBGP
display bgp multicast network
Display the peer group information
display bgp multicast group
[
group-name
]
Display the AS path information
matching the AS regular expression
display bgp multicast routing-table
regular-expression
as-regular-expression
Disable/enable debugging MBGP
UPDATE packets
[
undo
]
debugging bgp
mp-update
[
receive
|
send
]
[
verbose
]
