3Com Switch 8800 Configuration Guide
Chapter 37 BGP/MPLS VPN Configuration
37-27
V. Displaying MPLS l3vpn-lsp information
Table 37-38
Display MPLS l3vpn-lsp information
Operation
Command
Display MPLS l3vpn LSP
information
display mpls l3vpn-lsp
[
verbose
]
include
text
Display MPLS l3vpn LSP
vpn-instance information
display mpls l3vpn-lsp
[
vpn-instance
vpn
-
instance
-
name
] [
transit | egress | ingress
]
[
include
text
|
verbose
]
VI. Displaying sham link
Table 37-39
Display sham link
Operation
Command
Display sham link
display ospf
[
process
-
id
]
sham-link
37.4 Typical BGP/MPLS VPN Configuration Example
37.4.1 Integrated BGP/MPLS VPN Configuration Example
I. Network requirements
z
VPN-A includes CE1 and CE3; VPN-B includes CE2 and CE4.
z
Subscribers in different VPNs cannot access each other. The VPN-target attribute
for VPN-A is 111:1 and that for VPN-B is 222:2.
z
The PEs and P are switches supporting MPLS, and CEs are common layer 3
switches.
Note:
The configuration in this case is focused on:
z
Configure EBGP to exchange VPN routing information between CEs and PEs.
z
Configure OSPF for inter-PE communication between PEs.
z
Configure MP-IBGP to exchange VPN routing information between PEs.
