3Com Switch 8800 Configuration Guide
Chapter 46 System Maintenance and Debugging
46-22
1) Enabling
info-center
Perform the following configuration in system view.
Table 46-34
Enable/disable info-center
Operation
Command
Enable info-center
info
-
center enable
Disable info-center
undo info
-
center enable
Note:
Info-center is enabled by default. After info-center is enabled, system performances are
affected when the system processes much information because of information
classification and outputting.
2)
Configuring to output information to the log buffer
Perform the following configuration in system view.
Table 46-35
Configure to output information to log buffer
Operation
Command
Output information to log buffer
info
-
center logbuffer
[
channel
{
channel
-
number
|
channel
-
name
} |
size
buffersize
]*
Cancel the configuration of
outputting information to log buffer
undo info
-
center logbuffer
[
channel
|
size
]
3)
Configuring information source on the switch
By this configuration, you can define the information that sent to log buffer is generated
by which modules, information type, information level, and so on.
Perform the following configuration in system view:
Table 46-36
Define information source
Operation
Command
Define information source
info
-
center source
{
modu
-
name
|
default
}
channel
{
channel
-
number
|
channel
-
name
} [
debug
{
level
severity
|
state
state
}* |
log
{
level
severity
|
state
state
}* |
trap
{
level
severity
|
state
state
}* ]*
Cancel the configuration of
information source
undo info
-
center source
{
modu
-
name
|
default
|
all
}
channel
{
channel
-
number
|
channel
-
name
}
