3Com Switch 8800 Configuration Guide
Chapter 9 GARP/GVRP Configuration
9-6
Table 9-5
Set the GVRP registration type
Operation
Command
Set GVRP registration type
gvrp
registration
{
normal
|
fixed
|
forbidden
}
Restore the default GVRP registration
type
undo gvrp
registration
By default, GVRP registration type is
normal
.
9.2.5 Displaying and Debugging GVRP
After the above configuration, execute the
display
command in any view to display the
running of GVRP configuration, and to verify the configuration.
Execute the
debugging
command in user view to debug the configuration of GVRP.
Table 9-6
Display and debug GVRP
Operation
Command
Display GVRP statistics information
display gvrp statistics
[
interface
interface
-
list
]
Display GVRP global status information
display gvrp status
Enable GVRP packet or event
debugging
debugging gvrp
{
packet
|
event
}
Disable GVRP packet or event
debugging
undo debugging gvrp
{
packet
|
event
}
9.2.6 GVRP Configuration Example
I. Network requirements
To dynamically register and update VLAN information among switches, GVRP needs to
be enabled on the switches.
II. Network diagram
E3/1/1
Switch A
Switch B
E4/1/1
Switch A
Switch B
E3/1/1
Switch A
Switch B
E4/1/1
Switch A
Switch B
Figure 9-1
GVRP configuration example
