3Com 8800 SERIES Configuration Manual Download

Page: 45 / 773

3Com Switch 8800 Configuration Guide

Chapter 3 Command Line Interface

3-10

3.3.4 Common Command Line Error Messages

All the input commands by users can be correctly executed, if they have passed the

grammar check. Otherwise, error messages will be reported to users. The common

error messages are listed in the following table.

Table 3-4

Common command line error messages

Error messages

Causes

Cannot find the command.

Cannot find the keyword.

Wrong parameter type.

Unrecognized command

The value of the parameter exceeds the range.

Incomplete command

The input command is incomplete.

Too many parameters

Enter too many parameters.

Ambiguous command

The parameters entered are not specific.

3.3.5 Editing Characteristics of Command Line

Command line interface provides the basic command editing function and supports to

edit multiple lines. A command cannot longer than 256 characters. See the table below.

Table 3-5

Editing functions

Key

Function

Common keys

Insert from the cursor position and the cursor moves to the
right, if the edition buffer still has free space.

Backspace

Delete the character preceding the cursor and the cursor
moves backward.

Leftwards cursor key
<

←

> or <Ctrl+B>

Move the cursor a character backward

Rightwards cursor key
<

→

> or <Ctrl+F>

Move the cursor a character forward

Up cursor key <

↑

> or

<Ctrl+P>

Down cursor key <

↓

or <Ctrl+N>

Retrieve the history command.

Summary of Contents for 8800 SERIES






































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8800 SERIES

Reviews:

Related manuals for 8800 SERIES

Brands by name

Popular brands

3Com 8800 SERIES, Configuration Manual

Search results

Summary of Contents for 8800 SERIES

Reviews:

Related manuals for 8800 SERIES

Brands by name

Popular brands