3Com Switch 8800 Configuration Guide
Chapter 8 VLAN Configuration
8-4
8.4 Configuring Protocol-Based VLAN
The following sections describe the protocol-based VLAN configuration tasks:
z
Creating/Deleting a VLAN Protocol Type
z
Associating/Dissociating a Port with/from a Protocol-Based VLAN
8.4.1 Creating/Deleting a VLAN Protocol Type
You can use the following commands to create/delete a VLAN protocol type.
Perform the following configuration in VLAN view.
Table 8-6
Create/Delete a VLAN protocol type
Operation
Command
Create a VLAN protocol type
protocol-vlan protocol
{
ip ip
_
address
[
net
_
mask
] |
mode
{
ethernetii
etype
etype
_
id
|
llc dsap dsap
_
id
ssap
ssap
_
id
|
snap
etype etype
_
id
} }
Delete an existing VLAN protocol type
undo protocol-vlan protocol
{
protocol
_
index
[
to
protocol
_
end
] |
all
}
8.4.2 Associating/Dissociating a Port with/from a Protocol-Based VLAN
Perform the following configuration in Ethernet port view.
Table 8-7
Associate/Dissociate a port with/from a protocol-based VLAN
Operation
Command
Associate a port with a protocol-based
VLAN
port hybrid protocol-vlan
vlan
vlan
-
id
{
vlan
-
protocol
_
list
|
all
}
Remove a port from a protocol-based
VLAN
undo
port hybrid protocol-vlan
vlan
vlan
-
id
{
vlan
-
protocol
_
list
|
all
}
