3Com Switch 8800 Configuration Guide
Chapter 46 System Maintenance and Debugging
46-2
Table 46-3
Set the time zone
Operation
Command
Set the local time
clock timezone
zone_name
{
add
|
minus
}
HH:MM:SS
Restore to the default UTC time zone
undo clock timezone
By default, the UTC time zone is adopted.
46.1.4 Setting the Summer Time
You can set the name, starting and ending time of the summer time.
Perform the following configuration in user view.
Table 46-4
Set the summer time
Operation
Command
Set the name and range of the summer
time
clock summer-time
zone_name
{
one-off
|
repeating
}
start
-
time
start
-
date
end
-
time
end
-
date
offset
-
time
Remove the setting of the summer time
undo clock summer-time
By default, the summer time is not set.
46.2 Displaying the State and Information of the System
The switch provides the
display
command for displaying the the system state and
statistics information.
For the
display
commands related to each protocols and different ports, refer to the
relevant chapters. The following
display
commands are used for displaying the system
state and the statistics information.
Perform the following operations in any view.
Table 46-5
The
display
commands of the system
Operation
Command
Display the system clock
display clock
Display the system version
display version
Display the state of the debugging
display debugging
[
interface
{
interface
-
name
|
interface
-
type
interface
-
number
}
] [
module
-
name
]
