3Com Switch 8800 Configuration Guide
Chapter 28 PIM-DM Configuration
28-6
Table 28-6
Configuring the maximum number of PIM neighbor on an interface
Operation
Command
Configure the maximum number of PIM neighbor on an
interface
pim neighbor-limit
limit
Restore the limit of PIN neighbor to the default value
pim neighbor-limit
By default, the PIM neighbors on the interface are limited to 128.
If the number of PIM neighbors of an interface has exceeded the configured value by
the time of configuration, the existing PIM neighbors will not be deleted.
28.2.8 Clearing multicast route entries from PIM routing table
Perform the following configuration in user view.
Table 28-7
Clearing multicast route entries from PIM routing table
Operation
Command
Clear multicast
route entries from
PIM routing table
reset pim routing-table
{
all
| {
group-address
[
mask
{
group-mask
|
group-mask-length
} ] |
source-address
[
mask
{
source-mask
|
source-mask-length
} ] | {
incoming-interface
{
interface-type interface-number
|
null
} } } * }
28.2.9 Clearing PIM Neighbors
Perform the following configuration in user view.
Table 28-8
Resetting PIM neighbor
Operation
Command
Clear PIM
neighbors
reset pim neighbor
{
all
| {
neighbor-address
|
interface
interface-type interface-number
} * }
28.3 Displaying and Debugging PIM-DM
After the above configuration, execute
display
command in any view to display the
running of PIM-DM configuration, and to verify the effect of the configuration.
Execute
debugging
command in user view for the debugging of PIM-DM.
