manualshive.com logo in svg

3Com 8800 SERIES, Configuration Manual

The 3Com 8800 SERIES is a versatile networking solution that offers seamless connectivity. For a hassle-free installation, users can download the comprehensive Installation Manual for free from our website. This manual provides step-by-step instructions to ensure a smooth setup process, allowing you to make the most of this exceptional product.

Share
Download
background image

3Com Switch 8800 Configuration Guide 

Table of Contents

 

TOC-4 

Chapter 13 DHCP Configuration ................................................................................................ 13-1

 

13.1 Introduction to DHCP..................................................................................................... 13-1

 

13.1.1 How DHCP Works............................................................................................... 13-1

 

13.2 Configuring General DHCP ........................................................................................... 13-3

 

13.2.1 Enabling/Disabling DHCP Service ...................................................................... 13-4

 

13.2.2 Configuring Processing Method of DHCP Packets............................................. 13-4

 

13.2.3 Enabling/Disabling Fake DHCP Server Detection .............................................. 13-5

 

13.3 Configuring DHCP Server.............................................................................................. 13-6

 

13.3.1 Creating a Global DHCP IP Address Pool .......................................................... 13-6

 

13.3.2 Configuring IP Address Assignment Mode ......................................................... 13-7

 

13.3.3 Forbidding Specified IP Addresses to Be Automatically Assigned ..................... 13-9

 

13.3.4 Configuring Lease Time For DHCP Address Pool............................................ 13-10

 

13.3.5 Configuring DHCP Client Domain Names ........................................................ 13-11

 

13.3.6 Configuring DNS Server Address for DHCP Clients......................................... 13-12

 

13.3.7 Configuring NetBIOS Server Address for DHCP Clients .................................. 13-13

 

13.3.8 Configuring NetBIOS Node Type for DHCP Clients ......................................... 13-15

 

13.3.9 Configuring Custom DHCP Options.................................................................. 13-16

 

13.3.10 Configuring Outbound Gateway Address for DHCP Clients ........................... 13-17

 

13.3.11 Configuring Parameters for DHCP Server to Send Ping Packets .................. 13-17

 

13.3.12 Displaying and Debugging the DHCP Server ................................................. 13-18

 

13.3.13 Clearing the Configuration Information of the DHCP Server .......................... 13-19

 

13.3.14 DHCP Server Configuration Example ............................................................. 13-19

 

13.4 Configuring DHCP Relay ............................................................................................. 13-21

 

13.4.1 Introduction to DHCP Relay .............................................................................. 13-21

 

13.4.2 Configuring DHCP Relay .................................................................................. 13-22

 

13.4.3 Displaying and Debugging DHCP Relay........................................................... 13-23

 

13.4.4 DHCP Relay Configuration Example ................................................................ 13-24

 

Chapter 14 DNS Configuration................................................................................................... 14-1

 

14.1 Introduction to DNS ....................................................................................................... 14-1

 

14.1.1 Static Domain Name Resolution ......................................................................... 14-1

 

14.1.2 Dynamic Domain Name Resolution .................................................................... 14-1

 

14.2 Configuring Static Domain Name Resolution ................................................................ 14-2

 

14.3 Configuring Dynamic Domain Name Resolution ........................................................... 14-2

 

14.3.1 Enable/Disable Static Domain Name Resolution................................................ 14-2

 

14.3.2 Configure the IP Address of Domain Name Server ............................................ 14-3

 

14.3.3 Configure Domain Name Suffix........................................................................... 14-3

 

14.4 Displaying and Debugging Domain Name Resolution................................................... 14-4

 

14.5 DNS Configuration Example.......................................................................................... 14-4

 

14.6 Troubleshooting Domain Name Resolution Configuration ............................................ 14-5

 

Chapter 15 IP Performance Configuration................................................................................ 15-1

 

15.1 Configuring IP Performance .......................................................................................... 15-1

 

15.1.1 Configuring TCP Attributes ................................................................................. 15-1

 

Summary of Contents for 8800 SERIES






































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 8800 SERIES

Idis DR-8416 Operation Manual preview
DR-8416
Brand: Idis Pages: 123
Idis DR-6232H Installation Manual preview
DR-6232H
Brand: Idis Pages: 29
Idis DR-4516P Installation Manual preview
DR-4516P
Brand: Idis Pages: 28
Idis DirectIP DR-1304P Operation Manual preview
DirectIP DR-1304P
Brand: Idis Pages: 82
iDirect Evolution X1 Installation Manual preview
Evolution X1
Brand: iDirect Pages: 130
X-Micro WLAN 11g User Manual preview
WLAN 11g
Brand: X-Micro Pages: 74
Dahua Smart 1U Quick Start Manual preview
Smart 1U
Brand: Dahua Pages: 24
TP-Link TD-8817 User Manual preview
TD-8817
Brand: TP-Link Pages: 73
Netopia 3346-ENT Getting Started Manual preview
3346-ENT
Brand: Netopia Pages: 38
Multitech MultiConnect SE MTS2EA Quick Start Manual preview
MultiConnect SE MTS2EA
Brand: Multitech Pages: 8
Aztech DSL5068EN(1T1R) User Manual preview
DSL5068EN(1T1R)
Brand: Aztech Pages: 40
Ericsson Marconi OMS 1200 Product Description preview
Marconi OMS 1200
Brand: Ericsson Pages: 136
Zhone IMACS Network Device Product Manual preview
IMACS Network Device
Brand: Zhone Pages: 114
Asante IntraCore 6524 User Manual preview
IntraCore 6524
Brand: Asante Pages: 150
BEC 7404 Series User Manual preview
7404 Series
Brand: BEC Pages: 159
Buffalo AirStation WZR-1166DHP Quick Setup Manual preview
AirStation WZR-1166DHP
Brand: Buffalo Pages: 2
B-G Instruments DataPlot CB1224 Manual preview
DataPlot CB1224
Brand: B-G Instruments Pages: 4
Patton electronics ipRocketLink IAD 3086 Quick Start Manual preview
ipRocketLink IAD 3086
Brand: Patton electronics Pages: 12

Brands by name

Popular brands

Load more brands