manualshive.com logo in svg

3Com 8800 SERIES, Configuration Manual

The 3Com 8800 SERIES is a versatile networking solution that offers seamless connectivity. For a hassle-free installation, users can download the comprehensive Installation Manual for free from our website. This manual provides step-by-step instructions to ensure a smooth setup process, allowing you to make the most of this exceptional product.

Share
Download
background image

3Com Switch 8800 Configuration Guide 

Table of Contents

 

TOC-1 

Table of Contents 

 

Chapter 1 Product Overview ........................................................................................................ 1-1

 

1.1 Product Overview............................................................................................................... 1-1

 

1.2 Function Features .............................................................................................................. 1-1

 

Chapter 2 Logging into Switch .................................................................................................... 2-1

 

2.1 Setting Up Configuration Environment Through the Console Port.................................... 2-1

 

2.2 Setting Up Configuration Environment Through Telnet..................................................... 2-3

 

2.2.1 Connecting a PC to the Switch Through Telnet...................................................... 2-3

 

2.2.2 Telneting a Switch Through Another Switch ........................................................... 2-4

 

2.3 Setting Up Configuration Environment Through a Dial-up the Modem ............................. 2-5

 

Chapter 3 Command Line Interface............................................................................................. 3-1

 

3.1 Command Line Interface ................................................................................................... 3-1

 

3.2 Command Line View.......................................................................................................... 3-1

 

3.3 Features and Functions of Command Line ....................................................................... 3-7

 

3.3.1 Online Help of Command Line ................................................................................ 3-7

 

3.3.2 Displaying Characteristics of Command Line ......................................................... 3-9

 

3.3.3 History Command of Command Line ...................................................................... 3-9

 

3.3.4 Common Command Line Error Messages............................................................ 3-10

 

3.3.5 Editing Characteristics of Command Line............................................................. 3-10

 

Chapter 4 User Interface Configuration ...................................................................................... 4-1

 

4.1 User Interface Overview .................................................................................................... 4-1

 

4.2 User Interface Configuration.............................................................................................. 4-2

 

4.2.1 Entering User Interface View .................................................................................. 4-2

 

4.2.2 Define the Login Header ......................................................................................... 4-2

 

4.2.3 Configuring Asynchronous Port Attributes .............................................................. 4-3

 

4.2.4 Configuring Terminal Attributes............................................................................... 4-4

 

4.2.5 Managing Users ...................................................................................................... 4-6

 

4.2.6 Configuring Modem Attributes............................................................................... 4-10

 

4.2.7 Configuring Redirection......................................................................................... 4-10

 

4.3 Displaying and Debugging User Interface ....................................................................... 4-11

 

Chapter 5 Management Interface Configuration ........................................................................ 5-1

 

5.1 Management Interface Overview....................................................................................... 5-1

 

5.2 Management Interface Configuration ................................................................................ 5-1

 

Chapter 6 Ethernet Port Configuration ....................................................................................... 6-1

 

6.1 Ethernet Port Overview...................................................................................................... 6-1

 

6.2 Ethernet Port Configuration ............................................................................................... 6-1

 

6.2.1 Entering Ethernet Port View.................................................................................... 6-2

 

6.2.2 Enabling/Disabling an Ethernet Port ....................................................................... 6-2

 

6.2.3 Setting Ethernet Port Description............................................................................ 6-2

 

Summary of Contents for 8800 SERIES






































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 8800 SERIES

TP-Link TD-8817 Specifications preview
TD-8817
Brand: TP-Link Pages: 3
Moxa Technologies ICS-G7748A Series Quick Installation Manual preview
ICS-G7748A Series
Brand: Moxa Technologies Pages: 10
HMS Networks Anybus Communicator ABC4021 User Manual preview
Anybus Communicator ABC4021
Brand: HMS Networks Pages: 60
Divio SRA311-008P8 Series Installation Manual preview
SRA311-008P8 Series
Brand: Divio Pages: 4
Comelit IPNVR004BPOE Manual preview
IPNVR004BPOE
Brand: Comelit Pages: 19
Rasilient ApplianceStor 15MT User Manual preview
ApplianceStor 15MT
Brand: Rasilient Pages: 30
ADIC FCR 200 Operator'S Manual preview
FCR 200
Brand: ADIC Pages: 140
Edimax GS-5208PLG V2 Quick Installation Manual preview
GS-5208PLG V2
Brand: Edimax Pages: 15
Variscite VAR-SOM-MX8M-PLUS Quick Start Manual preview
VAR-SOM-MX8M-PLUS
Brand: Variscite Pages: 2
EMC VNX5300 Block Hardware Information Manual preview
VNX5300 Block
Brand: EMC Pages: 88
ZyXEL Communications Prestige 643 User Manual preview
Prestige 643
Brand: ZyXEL Communications Pages: 191
Westermo LRW-112 Series Manual preview
LRW-112 Series
Brand: Westermo Pages: 28
Oracle Database Appliance X6-2-HA Deployment And User'S Manual preview
Database Appliance X6-2-HA
Brand: Oracle Pages: 473
3onedata ICPE2600 Series Quick Installation Manual preview
ICPE2600 Series
Brand: 3onedata Pages: 5
Tripp Lite N304-10M Specification Sheet preview
N304-10M
Brand: Tripp Lite Pages: 2
Cambium Networks PMP/PTP 450 Series Quick Start Manual preview
PMP/PTP 450 Series
Brand: Cambium Networks Pages: 155
Cambium Networks PTP 250 User Manual preview
PTP 250
Brand: Cambium Networks Pages: 228
Cambium Networks PTP 550 Series User Manual preview
PTP 550 Series
Brand: Cambium Networks Pages: 249

Brands by name

Popular brands

Load more brands