3Com 8800 SERIES Configuration Manual Download

Page: 648 / 773

3Com Switch 8800 Configuration Guide

Chapter 43 File System Management

43-8

Table 43-11 lists the configuration of the switching as FTP server.

Table 43-11

Configuration of the switch as FTP server

Device

Configuration

Default

Description

Start FTP server.

FTP server
is disabled.

You can view the configuration
information of FTP server with
the

display

ftp

server

command.

Configure authentication
and authorization for
FTP server.

—

Configure username, password
and authorized directory for
FTP users.

Switch

Configure running
parameters for FTP
server.

—

Configure timeout time value
for FTP server.

Log into the switch from
FTP client.

— —

Caution:

The prerequisite for normal FTP function is that the switch and PC are reachable.

43.3.2 Enabling/Disabling FTP Server

You can use the following commands to enable/disable the FTP server on the switch.

Perform the following configuration in system view.

Table 43-12

Enable/disable FTP Server

Operation

Command

Enable the FTP server

ftp server enable

Disable the FTP server

undo ftp server

FTP server supports multiple users to access at the same time. A remote FTP client

sends request to the FTP server. Then, the FTP server will carry out the corresponding

operation and return the result to the client.

By default, FTP server is disabled.

43.3.3 Configuring the FTP Server Authentication and Authorization

The authorization information of FTP server includes the path to the desired directory

for FTP users. The FTP server service is available only for the authenticated and

Summary of Contents for 8800 SERIES






































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8800 SERIES

Reviews:

Related manuals for 8800 SERIES

Brands by name

Popular brands

3Com 8800 SERIES, Configuration Manual

Search results

Summary of Contents for 8800 SERIES

Reviews:

Related manuals for 8800 SERIES

Brands by name

Popular brands