manualshive.com logo in svg

3Com 8800 SERIES, Configuration Manual

The 3Com 8800 SERIES is a versatile networking solution that offers seamless connectivity. For a hassle-free installation, users can download the comprehensive Installation Manual for free from our website. This manual provides step-by-step instructions to ensure a smooth setup process, allowing you to make the most of this exceptional product.

Share
Download
background image

3Com Switch 8800 Configuration Guide 

Table of Contents

 

TOC-18 

46.1.1 Setting a Name for a Switch................................................................................ 46-1

 

46.1.2 Setting the System Clock .................................................................................... 46-1

 

46.1.3 Setting the Time Zone......................................................................................... 46-1

 

46.1.4 Setting the Summer Time ................................................................................... 46-2

 

46.2 Displaying the State and Information of the System...................................................... 46-2

 

46.3 System Debugging ........................................................................................................ 46-3

 

46.3.1 Enabling/Disabling the Terminal Debugging....................................................... 46-3

 

46.3.2 Displaying Diagnostic Information....................................................................... 46-4

 

46.4 Testing Tools for Network Connection .......................................................................... 46-5

 

46.4.1 ping...................................................................................................................... 46-5

 

46.4.2 ping-distribute enable.......................................................................................... 46-5

 

46.4.3 tracert .................................................................................................................. 46-6

 

46.5 Logging Function ........................................................................................................... 46-6

 

46.5.1 Introduction to Info-center ................................................................................... 46-6

 

46.5.2 Info-center Configuration................................................................................... 46-10

 

46.5.3 Sending the Configuration Information to the Loghost ..................................... 46-14

 

46.5.4 Sending the Configuration Information to Console terminal ............................. 46-16

 

46.5.5 Sending the Configuration Information to Telnet Terminal or Dumb Terminal . 46-19

 

46.5.6 Sending the Configuration Information to the Log Buffer.................................. 46-21

 

46.5.7 Sending the Configuration Information to the Trap Buffer ................................ 46-23

 

46.5.8 Sending the Configuration Information to SNMP Network Management.......... 46-25

 

46.5.9 Displaying and Debugging Info-center.............................................................. 46-27

 

46.5.10 Configuration Examples of Sending Log to the Unix Loghost ........................ 46-28

 

46.5.11 Configuration examples of sending log to Linux loghost ................................ 46-30

 

46.5.12 Configuration Examples of Sending Log to the Console Terminal ................. 46-32

 

Chapter 47 SNMP Configuration................................................................................................ 47-1

 

47.1 SNMP Overview............................................................................................................. 47-1

 

47.2 SNMP Versions and Supported MIB ............................................................................. 47-1

 

47.3 Configuring SNMP ......................................................................................................... 47-3

 

47.3.1 Setting Community Names ................................................................................. 47-3

 

47.3.2 Setting the System Information ........................................................................... 47-4

 

47.3.3 Enabling/Disabling SNMP Agent to Send Trap................................................... 47-4

 

47.3.4 Setting the Destination Address of Trap ............................................................. 47-5

 

47.3.5 Setting Lifetime of Trap Message ....................................................................... 47-5

 

47.3.6 Setting the Engine ID of a Local or Remote Device............................................ 47-6

 

47.3.7 Setting/Deleting an SNMP Group ....................................................................... 47-6

 

47.3.8 Setting the Source Address of Trap .................................................................... 47-7

 

47.3.9 Adding/Deleting a User to/from an SNMP Group ............................................... 47-7

 

47.3.10 Creating/Updating View Information or Deleting a View................................... 47-8

 

47.3.11 Setting the Size of the SNMP Packet Sent/Received by an Agent................... 47-8

 

47.3.12 Disabling SNMP Agent...................................................................................... 47-8

 

47.4 Displaying and Debugging SNMP ................................................................................. 47-9

 

Summary of Contents for 8800 SERIES






































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 8800 SERIES

D-Link DSL-2640BT Installation Manual preview
DSL-2640BT
Brand: D-Link Pages: 12
IntesisBox IBOX-BAC Series Installation Sheet preview
IBOX-BAC Series
Brand: IntesisBox Pages: 2
Linksys WRT54GR - Wireless-G Broadband Router Quick Installation Manual preview
WRT54GR - Wireless-G Broadband Router
Brand: Linksys Pages: 81
Keithley 7011-C Instruction Manual preview
7011-C
Brand: Keithley Pages: 98
Ubiquiti EdgeRouter PRO Quick Start Manual preview
EdgeRouter PRO
Brand: Ubiquiti Pages: 20
IDT 89HPES16NT2 User Manual preview
89HPES16NT2
Brand: IDT Pages: 292
NKE BOX Wi-Fi User Manual And Installation Manual preview
BOX Wi-Fi
Brand: NKE Pages: 15
VoiceLine InnoMedia MTA 3328-2R Getting Started Manual preview
InnoMedia MTA 3328-2R
Brand: VoiceLine Pages: 18
BinTec BIANCA/BRI Getting Started preview
BIANCA/BRI
Brand: BinTec Pages: 34
Sans Digital Mobileraid MR8X Detailed User'S Manual preview
Mobileraid MR8X
Brand: Sans Digital Pages: 81
Socket Go Wi-Fi! P322 User Manual preview
Go Wi-Fi! P322
Brand: Socket Pages: 18
Datalogic C-BOX 100 Instruction Manual preview
C-BOX 100
Brand: Datalogic Pages: 2
Atlantis Land A02-PCI-W54M Specification preview
A02-PCI-W54M
Brand: Atlantis Land Pages: 2
ZyXEL Communications P-660R-F1 series User Manual preview
P-660R-F1 series
Brand: ZyXEL Communications Pages: 268
Quamtum HotSpot HS2 User Manual preview
HotSpot HS2
Brand: Quamtum Pages: 42
Cabletron Systems TRMIM-10R Installation Manual preview
TRMIM-10R
Brand: Cabletron Systems Pages: 54
Billion myguard 6700G Specifications preview
myguard 6700G
Brand: Billion Pages: 2
KTI Networks KGS-2421 Installation Manual preview
KGS-2421
Brand: KTI Networks Pages: 25

Brands by name

Popular brands

Load more brands