3Com Switch 8800 Configuration Guide
Chapter 32 ACL Configuration
32-11
Display ACL configuration
display acl config
{
all
|
acl
-
number
|
acl
-
name
}
Display ACL application
information
display acl running-packet-filter
{
all
|
interface
{
interface
-
name
|
interface
-
type
interface
-
num
} |
vlan vlan
-
id
}
Display configuration information
of flow template
display flow-template
[
default
|
interface
interface
-
type
interface
-
num
|
slot
slotid
|
user-defined
]
Clear ACL statistics
reset acl counter
{
all
|
acl
-
number
|
acl
-
name
}
The
display acl config
command only displays the ACL matching information
processed by the CPU. You can use the
display qos-interface traffic-statistic
commands to view the ACL matching information during data forwarding.
See the corresponding
Command
Manual
for description of parameters.
32.4 ACL Configuration Example
32.4.1 Advanced ACL Configuration Example
I. Network requirements
The departments in the intranet are connected through 100 Mbps ports of the switches.
The research and development (R&D) department is connected through the port
Ethernet2/1/1. The wage server of the financial department is at 129.110.1.2. The
requirement is to configure ACLs correctly to limit that the R&D department can only
access the wage server at working time from 8:00 to 18:00.
II. Network diagram
Administrative Dept
Financial Dept
President's office
129.111.1.2
Wage server
129.110.1.2
Switch
#1
#4
#3
#2
To router
Figure 32-1
Network diagram for advanced ACL configuration
