3Com Switch 8800 Configuration Guide
Chapter 7 Link Aggregation Configuration
7-9
7.3 Displaying and Debugging Link Aggregation
After the above configuration, execute the
display
command in any view to display the
running of the link aggregation configuration, and to verify the effect of the
configuration.
In user view, execute the reset command to clear statistics on the LACP-enabled port,
and the
debugging
command to enable LACP debugging.
Table 7-7
Display and debug link aggregation
Operation
Command
Display summary information of all
aggregation groups
display link-aggregation summary
Display detailed information of a specific
aggregation group
display link-aggregation verbose
agg
-
id
Display the local device ID
display lacp system-id
Display detailed link aggregation
information at the port
display link-aggregation interface
{
interface
-
type
interface
-
number
|
interface
-
name
} [
to
{
interface
-
type
interface
-
num
|
interface
-
name
} ]
Clear LACP statistics on the port
reset lacp statistics
[
interface
{
interface
-
type
interface
-number |
interface
-
name
} [
to
{
interface
-
type
interface
-
num
|
interface
-
name
} ] ]
Disable/enable LACP state debugging
[
undo
]
debugging
lacp state
[
interface
{
interface
-
type
interface
-
number
|
interface
-
name
} [
to
{
interface
-type
interface
-
num
|
interface
-
name
} ] ] { {
actor-churn
|
mux
|
partner-churn
|
ptx
|
rx
}* |
all
}
Disable/enable LACP packet debugging
[
undo
]
debugging lacp packet
[
interface
{
interface
-type
interface
-
number
|
interface
-
name
} [
to
{
interface
-
type
interface
-
num
|
interface
-
name
} ] ]
Disable/enable link aggregation error
debugging
[
undo
]
debugging link-aggregation
error
Disable/enable link aggregation event
debugging
[
undo
]
debugging link-aggregation
event
