Zener SMARTSTART 6000, Инструкция по эксплуатации

Страница: 38 / 57

Programming
Technical Manual: Smartstart
®
6000 IMI0042 rev K
Page 35
Table 4: Flash Alerts / Messages
Message: Explanation:
PENDING: Start is delayed/postponed by an
active interlock alarm.
WARNING: There is an active warning alarm.
The alarm is identified by W###
displayed on 2
nd
line. The Soft
starter has not tripped. Refer to ‘D05
Warning Alarms’ for selection and
adjustment.
TRIPPED: The SMARTSTART has tripped on a
fault condition. The alarm is
identified by T### displayed on 2
nd
line. Refer to page 30 for more detail
on trip alarms.
OVERRIDE: Essential Services Over ‐ ride (ESO)
requested.
AR #12 in 1234s: Starter has tripped and automatic
restart is pending. Includes AR
counter value and delay to
reset/restart attempt (with T##
alarm displayed).
AR#12 Anytime:
(Soft Starter or
Motor Cooling)
Starter has tripped and automatic
restart is pending. Includes AR
counter value and delay to
reset/restart attempt (with T##
alarm displayed). The actual restart
time is dependent on thermal reset
level and cooling rate.
LOCKOUT: Flashed after all Auto restart
attempts exhausted.
.
Table 5: Interlock Messages
Message: Explanation:
I21 STR OVERTEMP Starter too hot to start.
Waiting for heatsink to cool.
I30 MTR OVERLOAD Motor is too hot to start.
Motor TOL reset threshold not
reached.
I31 MTR OVERTEMP Motor (thermistor) is too hot
to start.
I51 Min Off Time Waiting for min off timer to
expire.
I52 Prestart Dly Waiting for ‘start’ input
(D1/D2) timer to expire.
I53 No Supply Line relay on but no supply
detected.
I70 Enable OFF Local Enable digital input is off.
I71 Coast ON Local coast input is on (D1/D2).
I72 Stop ON Local stop input is on (D1/D2).
I73 Start OFF Local start input is off (D1/D2).
I74 Net Enbl OFF Network enable command flag
is off.
I75 Net coast ON Network coast command flag is
on.
I76 Net Strt OFF Network Coast command flag
is off.