Zeiss EVO, Инструкция по эксплуатации, Страница: 170 / 180

9 Technical Data and Conformity | 9.6 Applicable Standards and Regulations ZEISS
The Microscope System is in compliance with the requirements of the following regulations and
directives:
2006/42/EC Machine Directive
2011/65/EU RoHS Directive
98/79/EC Annex 1 IvD Directive
2014/30/EU Electromagnetic Compatibility
KN 61000-6-2, KN 11 Korean EMC standards
2014/35/EU Low Voltage Directive
EN 55011 Noise emission according to CISPR 11
intended use in industrial environment
EN 60204-1:2006/A1:2009 Safety of machinery – Electrical equipment of
machines – Part 1: General requirements
EN 61010-1 Safety requirements for electrical equipment
for measurement, control, and laboratory use
– Part 1: General requirements
EN 61326-1 Electrical equipment for measurement, con-
trol and laboratory use – EMC requirements –
Part 1: General requirements
EN ISO 12100 Safety of machinery – General principles for
design – Risk assessment and risk reduction
EN ISO 13849-1:2008 Safety of machinery – Safety related parts of
control systems – Part 1: General principles
for design
The Microscope System and its accessories have been classified as instrument category 9 (labora-
tory equipment or comparable standard). It also comply, as applicable, with the EU-regulations
2011/65/EU (RoHS) and 2012/19/EU (WEEE).
The resulting EMC environment can change through the use / installation of 3rd party compo-
nents (e.g. detectors / plasma cleaners). As soon as the EMC environment of a 3rd party compo-
nent is "domestic environment" or "EMC controlled environment", the entire Microscope System
must be classified as an "EMC controlled environment". Due to the lower immunity requirement,
the user must take suitable protective measures with regard to electromagnetic fields in the instal-
lation room as well as interferences from the mains power supply.
In addition to the European and international guidelines and standards, the 21 CFR §1040.10:
"Performance Standards for light emitting products - laser products" applies for the USA.
The following EMC user notice is for Korea only:
기종별 사용자안내문
A 급기기 ( 업무용방송통신기자재 ) 이기기는업무용 (A 급 ) 전자파적합기기로서
판매자또는사용자는이점을주의하시기바라
며
, 가정외의지역에서사용하는것을목적으
로합니다 .
European and International Directives / Standards: For more information on ISO, CSA, SEMI certifi-
cates or CE Declarations of Conformity, contact your ZEISS Sales & Service Partner.
ZEISS works according to a certified Environment Management System according to ISO 14001.
The Microscope System was developed, tested and produced in accordance with the valid regula-
tions and guidelines for environmental law of the European Union.
170 Instruction Manual ZEISS EVO | en-US | Rev. 10 | 354706-0780-006