Zeiss EVO, Инструкция по эксплуатации, Страница: 150 / 180

8 Decommissioning and Disposal | 8.2 Transport and Storage ZEISS
NOTICE
Damage during transport
Sensitive components of the microscope can get damaged during transport.
4
The microscope may only be transported in air-suspended vehicles.
4
Moving parts must be secured during transport to prevent them from slipping or tipping
over.
4
Install shock/tilt watches.
4
Avoid rocking the crates back and forth.
4
Devices for transporting the microscope must be rated to handle its full weight and dimen-
sions. Note the weight information on the package and on the shipping document.
4
Check that none of the items has been damaged during shipment.
4
Otherwise contact your local ZEISS service representative.
The following regulations must be observed before and during transport:
§
Check if there is any moving equipment available on-site that can be used to transport the Mi-
croscope System safely to the installation room. In clean-room environments, this check is
mandatory.
§
The Microscope System may only be transported in air-suspended vehicles.
§ Moving parts must be secured during transport to prevent them from slipping or tipping over.
§
Avoid rocking the crates back and forth.
§
Devices for transporting the Microscope System must be rated to handle its full weight and di-
mensions.
§ Note the weight information on the package and on the shipping document.
§
Where possible, the original packaging must be used for shipping or transport.
Forklift and hand
pallet truck
For on-site transport and unloading, a forklift and/or a hand pallet truck are necessary.
§
Ensure all hallways and corners are wide enough to be passed by.
§
Please check the location requirements for door and hallway widths.
§ Check the entrance to the building and to the final site for suitable ramps and compliant ele-
vators that can match the weights of the Microscope System where necessary.
§
Some components, such as the tables, are large, heavy or bulky and may require extra assis-
tance to get the units into the allocated site.
Maximum shock
resistance
§
Do not drop or bump the boxes during movement or storage. Any acceleration shall be
< 10 g.
§ Evaluate packaging shock and tilting sensors on delivery and after internal transport.
Packaging The microscope is delivered in two containers:
§
Reusable wooden crate
Dimensions and weight of crate:
1480 × 1480 × 2070 mm³ (W × D × H), appr. 878 kg
§ Cardboard box on Euro pallet
1400 × 1220 × 1350 mm³ (W × D × H), appr. 340 kg
Dimensions of plinth un-crated:
784 × 1015 × 1780 mm³ (W × D × H, depth is 1215 mm with PSU on transit clamp fitted to
the rear of plinth), appr. 650 kg
Check that none of the items has been damaged during shipment.
150 Instruction Manual ZEISS EVO | en-US | Rev. 10 | 354706-0780-006