manualshive.com logo in svg

Zeiss EVO, Инструкция по эксплуатации, Страница: 112 / 180

Поделиться
Скачать
Zeiss EVO Скачать руководство пользователя страница 112

6 Care and Maintenance | 6.1 Safety During Cleaning and Maintenance

ZEISS

6 Care and Maintenance

To ensure the best possible performance of the Microscope System, maintenance must be per-
formed on a regular basis. To maintain operational safety and reliability of the Microscope Sys-
tem, we recommend entering into a 

ZEISS Protect service agreement

. Please keep the service

logs for your Microscope System.

Info

Additional information and detailed descriptions are available in the further applicable docu-
ments, or ask your ZEISS Sales & Service Partner.

6.1 Safety During Cleaning and Maintenance

Only conduct preventive measures described here. All tasks of maintenance, service and cleaning
not described must only be performed by an authorized ZEISS service representative.

Any unauthorized intervention or any operation outside the scope of the intended use can lead to
injuries and property damage and voids all rights to warranty claims. Only original spare parts
from ZEISS may be used.

 DANGER

Electric shock due to live parts

When the Microscope System is still switched on, coming in contact with live parts can lead to
electric shock or burn.

4

Switch off Microscope System prior to opening or cleaning.

4

Disconnect live parts from the power supply.

6.2 Maintenance Schedule

To maintain best possible performance of the Microscope System, it is essential to perform pre-
ventive maintenance on a regular basis.

In order to ensure optimum performance, it is essential to perform preventive maintenance at reg-
ular intervals. The recommended intervals for maintenance depend on the total uptime of the Mi-
croscope System.

§

24 hours, 7 days a week: semiannually

§

8 hours, 5 days a week: annually

Info

Keep track of maintenance work and contact the ZEISS service representative in time.

A list of ZEISS locations and authorized service partners can be found at:

http://www.zeiss.com/microscopy

112

Instruction Manual ZEISS EVO | en-US | Rev. 10 | 354706-0780-006

Содержание EVO





















































































































































































Отзывы:

Нет отзывов