Zeiss EVO Скачать руководство пользователя страница 100

Страница: 100 / 180

5 First Operating Steps | 5.7 Working with Specific Specimen Types

ZEISS

5. If another pressure-limiting aperture is fitted,

remove the aperture with the aperture removal
tool.

6. Use the red upper aperture tool to install the EP

aperture.

INFO:

This should be finger-tight only.

7. Use the black lower aperture tool to insert the

beamsleeve aperture.

INFO:

Screw in until the O-ring is completely

inserted (cannot be seen) and the beamsleeve
aperture hits a hard stop. Do not over tighten.
The O-ring will give some resistance which is
normal.

8. In the

SEM Controls

panel, select the

Apertures

tab.

9. Click

Select Aperture

10. Select

EP Aperture

and select the appropriate beamsleeve aperture.

11. Turn the knob of the mid-column aperture

changer, to select the 750 μm aperture (posi-
tion 3).

In the

Apertures

tab, the 100 μm EP aperture is automatically selected.

100

Instruction Manual ZEISS EVO | en-US | Rev. 10 | 354706-0780-006

Содержание EVO





















































































































































































Результаты поиска

Содержание EVO

Отзывы:

Zeiss EVO, Инструкция по эксплуатации, Страница: 100 / 180

Результаты поиска

Содержание EVO

Отзывы: