YASKAWA GA800 Series, Руководство по программированию

Страница: 69 / 644

Parameter
List
1
1.10 H: Terminal Functions
YASKAWA TOEPYAIGA8002B GA800 Drive Programming 69
■
H2-xx: MFDO Setting Values
Setting Value Function Description Ref.
0 During Run
The terminal activates when the Run command is input and when the drive is outputting voltage.
ON : Drive is running
OFF : Drive is stopping
390
1 Zero Speed
The terminal activates when the output frequency < E1-09 [Minimum Output Frequency] or b2-01 [DC Injection/Zero
SpeedThreshold] .
Note:
Parameter A1-02 [Control Method Selection] selects which parameter is the reference.
A1-02 Setting Control method selection Parameter Used as the Reference
0 V/f E1-09
1 CL-V/f E1-09
2 OLV b2-01
3 CLV E1-09
4 AOLV E1-09
5 OLV/PM E1-09
6 AOLV/PM E1-09
7 CLV/PM b2-01
8 EZOLV E1-09
ON : Output frequency < value of E1-09 or b2-01 .
OFF : Output frequency ≥ value of E1-09 or b2-01 .
390
2 Speed Agree 1
The terminal turns on when the output frequency is in the range of the frequency reference ± L4-02 [Speed Agree
Detection Width] .
Note:
• The detection function operates in the two motor rotation directions.
• The drive outputs the motor speed status when A1-02 = 3, 7 [CLV, CLV/PM] . It also outputs the motor speed
status when A1-02 = 4 and n4-72 = 1 .
ON : The output frequency is in the range of “ frequency reference ± L4-02 ” .
OFF : The output frequency does not align with the frequency reference although the drive is running.
391
3 User-Set Speed Agree 1
The terminal activates when the output frequency is in the range of L4-01 [Speed Agree Detection Level] ± L4-02
[Speed Agree Detection Width] and in the range of the frequency reference ± L4-02 .
Note:
• The detection function operates in the two motor rotation directions. The drive uses the L4-01 value as the
forward/reverse detection level.
• The drive outputs the motor speed status when A1-02 = 3, 7 [CLV, CLV/PM] . It also outputs the motor speed
status when A1-02 = 4 and n4-72 = 1 .
ON : The output frequency is in the range of “ L4-01 ± L4-02 ” and the range of frequency reference ± L4-02 .
OFF : The output frequency is not in the range of “ L4-01 ± L4-02 ” or the range of frequency reference ± L4-02 .
392
4 Frequency Detection 1
The terminal deactivates when the output frequency > L4-01 [Speed Agree Detection Level] + L4-02 [Speed Agree
Detection Width] . After the terminal turns off, the terminal continues to remain off until the output frequency reaches
the level set with L4-01 .
Note:
•
The detection function operates in the two motor rotation directions. The drive uses the L4-01 value as the
forward/reverse detection level.
• The drive outputs the motor speed status when A1-02 = 3, 7 [CLV, CLV/PM] . It also outputs the motor speed
status when A1-02 = 4 and n4-72 = 1 .
ON : The output frequency is less than the value of L4-01 or does not exceed the value of L4-01 + L4-02 .
OFF : The output frequency > L4-01 + L4-02 .
392
5 Frequency Detection 2
The terminal activates when the output frequency is higher than the value of L4-01 [Speed Agree Detection Level] .
After the terminal activates, the terminal stays activated until the output frequency = L4-01 - L4-02 .
Note:
•
The detection function operates in the two motor rotation directions. The drive uses the L4-01 value as the
forward/reverse detection level.
• The drive outputs the motor speed status when A1-02 = 3, 7 [CLV, CLV/PM] . It also outputs the motor speed
status when A1-02 = 4 and n4-72 = 1 .
ON : The output frequency is higher than the value of L4-01 .
OFF : The output frequency < “ L4-01 - L4-02 ” , or ≤ L4-01 .
393
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV