YASKAWA GA800 Series, Руководство по программированию

Страница: 552 / 644

3.4 Keypad Operation
552 YASKAWA TOEPYAIGA8002B GA800 Drive Programming
2. Push or to select the digit, then push or to change the value.
3. Push to keep the changes.
Note:
The HOME screen must show U1-01 [Frequency Reference] or you must set the keypad as the Run command source (REMOTE) to use this
function.
■
Show the Main Menu
Push to show the main menu. Push (HOME) to go back to the HOME screen.
◆
Displaying the Monitor
This section shows how to show the standard monitor ( Ux-xx ).
1.
Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for , push (Back), and then push to show [Home].
2.
Push (Menu).
3.
Push or to select [Monitors], then push .
4.
Push or to select [Standard Monitor], then push .