XOR electronics Nerdseq, Руководство пользователя

Страница: 91 / 133

trigger delay time. Use these to achieve a humanization effect. (Press OK on one of the
random ranges to enter the → Random Ranges Screen and change the range).
- Trigger Setting → Either Normal or Inverted. when Normal is selected the Triggers Gate
behave normal (Off = 0 Volt, On = 5 Volt). If Inverted is selected, the Trigger/Gate output is
inverted → Off = 5 Volt, On = 0 Volt.
- Voltage Setting → Defines the type of voltage output:
• 1V/Oct
•
1.2V/Oct (Buchla scaling)
•
Hz/Volt (old analogue synth scaling)
Be aware that the 1.2V/Oct and Hz/Volt scales are only tested theoretically by
measuring but not with real hardware. (It is reported to work though) Also it is
possible that you need other Trigger levels than those which the NerdSEQ
produces. For this you would have to convert the normal trigger out levels using
inverters, amplifiers and by changing the offset.
- Random FX1..4 → Enables randomized values for the selected FX. If turned on and a
range selected, all FX values in the selected FX will play with random values within the
selected ranges. This can be also enabled/disabled with the Random FX command
(RDMN) from the FX list. Press
OK to get to the → Random Ranges Screen and change
the ranges.
- Midi - MOD → Defines if the track played or recorded via midi that either the CC value 1
(MOD wheel) movements or the velocity of the note will be recorded/played into the mod
column (and so the MOD output of this track)
- Midi Poly Tracks → Defines if a track should act as a monophonic (1) or as the basis of a
polyphonic (2+) track if it played or recorded from midi. In case of a polyphonic track, the
amount of voices will be spread on the higher tracks. So for example if it is Track 2 and the
amount of Poly tracks is 3, then Track 2, 3 and 4 will be combined as a polyphonic group.
Midi data played on track 2 will be split up then on the 3 tracks, depending on the amount of
voices played. Also the MOD/Velocity setting of Track 2 is valid then for the other tracks.
This works for the local CV/Gate Tracks. All other track types are begin ignored. The
aximum Track number is 6, so all higher Tracks than 6 in the polyphonic groups are gnored
s well. (Which would allow a 6 voice polyphonic behaviour if Track is set up for 6 oices). ch
of the polyphonic grouped tracks get it’s own CV/Gate/MOD per voice which llows for
mple also to connect independent Envelopes to it.
NerdSEQ – a tracker based Eurorack sequencer Page 91
User Manual Revision V1.26 for Firmware V1.26 12 July 2022