To delete:
To delete/empty only the current cursor position press
SHIFT
+
DELETE
to empty the current
position or
SHIFT
+
UP
+
DELETE
to really delete the position and move the following rows one up.
To delete a block:
Press
SHIFT
+
MARK
on the begin position which should be emptied/deleted (Screen border colour
should change to indicate the Mark mode)
Move the cursor to the end position of the desired area.
You can choose between Emptying or Deleting the marked block
1 Emptying: Press
SHIFT
+
DELETE
to empty the marked block.
2 Deleting: Press
SHIFT
+
UP
+
DELETE
to delete the marked block. All rows beneath the marked
block will move up and fill the deleted space.
Delete marked values will also copy the marked block into the clipboard so the delete function can
also be used for a cut + paste function.
Copy and paste actions can be made between all compatible columns, regardless of the type or
where they are. Notes to Notes, Triggers to Triggers, Grooves to Grooves etc.
FX columns can only be copied to the same kind of Track type.
To copy for example a note part from a CV/Gate track to the 2
nd
note part of a Midi Track you mark
the note part in the CV/Gate Track. And in the Midi Track you go to the 2
nd
note part where it should
be copied and press
SHIFT+COPY.
The same goes for all compatible fields. They must match also for the markings.
Note columns usually set a note and can also set a note off. A note off can be set either below the
lowest note, or by using the delete (SHIFT+DELETE) function. If the field is empty, then a note off
will be inserted. Else the field is being cleared. This is a toggle function.
NerdSEQ – a tracker based Eurorack sequencer
Page 63
User Manual Revision V1.26 for Firmware V1.26
12 July 2022
