Xerox COLORQUBE 8570, Руководство по обслуживанию

Страница: 298 / 433

October 2012
4-104 ColorQube 8570/8870 Service Manual
ADJ 1.2
Revised, 3rd Revision - Xerox Internal Use Only Repairs and Adjustments
ADJ 1.2 Homing the Printhead Forward to Print Position
Purpose
To home the Head Tilt Gear and as a result, the Printhead. Two procedures are given, one for
when the Printhead is installed, and one for when the Printhead is not installed.
Printhead is Installed
Adjustment
NOTE: For additional information, refer to Homing the Printhead Forward to Print Position
video (also available in the ColorQube 8570/8870 Training materials).
1. Remove the Drum Maintenance Unit ( REP 1.16 ) (optional or if possible).
2. Use a small screwdriver to rotate the X-Axis Shaft with the Printhead centered over the
Drum to clear the Left and Right Printhead Restraints.
3. Rotate the Drum Maintenance Camshaft 360
°
clockwise using a flat blade screwdriver as
shown in Figure 1 . If the Head Tilt Gear is engaged, manually assist the movement of the
Printhead. There is an audible click when the Head Tilt Gear disengages from its drive
train.
Figure 1 Rotating the Drum Maintenance Shaft
4. Disengagement of the Head Tilt Gear is shown in Figure 2 .
NOTE: If the latch is accidentally engaged (upward), rotate the gear CCW to disengage it.
Figure 2 Head Tilt Gear Indicator