Xerox COLORQUBE 8570, Руководство по обслуживанию, Страница: 216 / 433

October 2012
4-22 ColorQube 8570/8870 Service Manual
REP 2.3
Revised, 3rd Revision - Xerox Internal Use Only Repairs and Adjustments
13. Move the Printhead Tilt Spring from its position on the Printhead to release its tension and
hook it behind the notch as shown in Figure 5 .
Figure 5 Releasing the Printhead Tilt Spring
14. Disconnect the Air Hose from the Purge Pump.
15. Pull the X-Axis Bias Spring and Hook out slightly, and then rotate downward to allow it to
rest in detents provided on the frame as shown in Figure 6 .
Figure 6 X-Axis Bias Spring Hook
16. Remove 1 screw (plastic, T-20) that secures each Restraint.
Figure 7 Removing the Printhead Restraint Screws
17. Shift the Restraint inwards toward the Printhead while lifting it.
Figure 8 Removing the Printhead Restraints