Woodward 505HT, Инструкция по установке и эксплуатации

Страница: 73 / 199

Manual 35116 505HT for Pelton Turbines
Woodward 71
Table 4-5. Nozzle Test Screen Command Buttons and Parameters
Start Test Command
Visibility: Always This command will start the test of this specific nozzle.
User Level: Operator
Stop test
Command
Visibility: Always
This command will stop the test of this specific nozzle.
User Level: Operator
Test Running
Monitor
Visibility: Always Shows if the test is actually running.
User Level: N/A
Inhibited
Monitor
Visibility: Always Shows if the test is Inhibited.
User Level: N/A
Minimum Value
0 (0, 100) %
Visibility: Always Minimum demand value to test the nozzle. The demand that will
start and finish the test.
User Level: Service
Maximum Value
100 (0, 100) %
Visibility: Always Maximum demand value to test the nozzle. The top of the curve.
User Level: Service
Step Value
10 (0, 100) %
Visibility: Always Step of each increasing or decreasing during the test.
User Level: Service
Test State
Monitor
Visibility: Always It shows the actual state of the test (Error, Disable, Go to Min,
Go to Max, Step up, Step down, etc.).
User Level: N/A
Demand
Monitor
Visibility: Always It shows the actual demand of this nozzle.
User Level: N/A
Remaining Time
Monitor
Visibility: Always It shows the remaining time to go to another step of the test.
User Level: N/A
Min.
0.0 (-10.0, 110.0)
Visibility: Always
It configures the minimum scale of the trend.
User Level: Service
Max.
100.0 (-10.0, 1100.0)
Visibility: Always It configures the minimum scale of the trend.
User Level: Service
Time.
60.0 (10.0, 600.0) s
Visibility: Always Time span of the trend
User Level: Service
Released