Woodward 505HT, Инструкция по установке и эксплуатации

Страница: 120 / 199

Manual 35116 505HT for Pelton Turbines
Woodward 118
Go to
Command
Visibility: Always
Command to send the level setpoint to the “Go to Value”.
User Level: Operator and
control in Level Control
Go to Value *0.0 (-30000.0, 30000.0) eu
Visibility: Always Value where the level reference goes when a “Go to” command is
issued.
User Level: Operator and
control in Level Control
Enable (Remote level) Command
Visibility: Remote level in use Enable the remote level control mode.
User Level: Operator and
control in Level Control
Disable (Remote Level) Command
Visibility: Remote level in use Disable the remote level control mode.
User Level: Operator and
control in Level Control
Disable (Remote Level)
Command
Visibility: Remote level in use Disable the remote level control mode.
User Level: Operator and
control in Level Control
Remote Ref.
Monitor
Visibility: Remote level in use It shows the actual remote level reference, from the analog input.
User Level: Monitor
Remote Level Fault
Monitor
Visibility: Remote level in Use
It shows if there is a signal fail on the analog input configured for this
function.
User Level: Monitor
Remote Rate
0.2 (0.01, 1000.0) eu/s
Visibility: Remote level in Use The remote level will follow the analog input configured for this
function, but will use this rate to prevent bumps on the reference.
Even if the analog input has big oscillations, the reference will always
ramp slowly.
User Level: Service
There are some level statuses at the bottom of the screen.
Released