Woodward 505HT, Инструкция по установке и эксплуатации

Страница: 126 / 199

Manual 35116 505HT for Pelton Turbines
Woodward 124
Communications (Ethernet) Screen
The purpose of this screen is to configure Ethernet communication ports. There are two available
Ethernet links and they can be programmed on this screen. The screen has the same configuration for
both ports, but the explanation will be made for just the port 1, as the port 2 has the same parameters.
Figure 4-46. Communications (Ethernet) Screen
Table 4-37. Communications (Ethernet) Screen Configuration Values
Use Ethernet 1 FALSE
Visibility: Always Select if the Ethernet specific port communication will be used.
User Level: Service
Timeout
10.0 (0.5, 30.0) s
Visibility: Always Enter the timeout for the Ethernet port.
User Level: Service
ASC-II / RTU
RTU
Visibility: Always Enter the ASC-II or RTU for the Ethernet port.
User Level: Service
Network Address
2 (1, 247)
Visibility: Always Enter the ASC-II or RTU for the Ethernet port.
User Level: Service
Enable Analog Write
FALSE
Visibility: Always Enable the analog write for the Ethernet port. If disable won’t be
possible to write any analog value through this port.
User Level: Service
Released