Woodward 505HT, Инструкция по установке и эксплуатации

Страница: 108 / 199

Manual 35116 505HT for Pelton Turbines
Woodward 106
Table 4-26. Deflector Screen Configuration Values
Use deflector TRUE
Visibility: Always Select to inform to 505 that the turbine has no deflector. This will
prevent from some alarms and shutdowns from deflector fails.
CONFIGURATION MODE REQUIRED
User Level: Configure
Use 2 Sensors (Closed and
Opened) TRUE
Visibility: Always Select to use 2 different sensors, one for deflector closed and
another for deflector opened. If not select the 505 will use only
one for deflector closed, the 505 will consider deflector opened
when this contact is opened.
CONFIGURATION MODE REQUIRED
User Level: Configure
Output Type CONTINUOUS
Visibility: Always Select the output type. The options are Continuous or pulse. If
configured for continuous the control will keep the output to
close or open energized during all time. If configured to pulse the
control will pulse the output to open or close during the pulse
time.
CONFIGURATION MODE REQUIRED
User Level: Configure
Pulse Time 1.5 (0.5, 10.0) s
Visibility: Always Pulse time, when the output type is selected to pulse.
User Level: Operator
Deflector Closed Mismatch
Function
SHUTDOWN
Visibility: Always Choose if the Deflector Closed Mismatch will generate an alarm
or a shutdown.
CONFIGURATION MODE REQUIRED
User Level: Configure
Deflector Closed Mismatch Delay 10.0 (0.0, 60.0) s
Visibility: Always Time delay to generate the Deflector Closed Mismatch.
User Level: Service
Deflector Opened Mismatch
Function
SHUTDOWN
Visibility: Always Choose if the Deflector Opened Mismatch will generate an alarm
or a shutdown.
CONFIGURATION MODE REQUIRED
User Level: Configure
Deflector Opened Mismatch Delay 10.0 (0.0, 60.0) s
Visibility: Always Time delay to generate the Deflector Opened Mismatch.
User Level: Service
Press the soft key “Commands” to go to deflector commands screen.
Released