Woodward 505HT, Инструкция по установке и эксплуатации

Страница: 119 / 199

Manual 35116 505HT for Pelton Turbines
Woodward 117
Level Commands Screen
The purpose of this screen is to send the Level control mode commands.
Figure 4-42. Level Commands Screen
Table 4-33. Level Commands Screen Configuration Values
Enable
Command
Visibility: Always
Enable the level control mode.
User Level: Operator
Disable
Command
Visibility: Always Disable the level control mode.
User Level: Operator
Lower
Command
Visibility: Always This command will lower the demand to level control when in level
control mode
User Level: Operator and
control in Level Control
Raise
Command
Visibility: Always This command will raise the demand to level control when in level
control mode
User Level: Operator and
control in Level Control
Default rate
0.2 (0.01, 1000.0) eu/s
Visibility: Always Default that the level setpoint will ramp when a raise or lower
command I sent to the control or the setpoint is changed by modbus
or display.
User Level: Operator and
control in Level Control
Released