Woodward 505HT, Инструкция по установке и эксплуатации

Страница: 121 / 199

Manual 35116 505HT for Pelton Turbines
Woodward 119
Overspeed Test Screen
The purpose of this screen is to send the overspeed test commands.
Figure 4-43. Overspeed Test Screen
Table 4-34. Overspeed Test Screen Configuration Values
Enable
Command
Visibility: Always
Enable the overspeed test mode.
User Level: Service
Disable
Command
Visibility: Always Disable the overspeed test mode.
User Level: Service
Lower
Command
Visibility: Always This command will lower the speed setpoint when in overspeed test
mode. Note: The rate of the ramp will be the overspeed rate.
User Level: Service and
overspeed test enabled
Raise
Command
Visibility: Always This command will raise the speed setpoint when in overspeed test
mode. Note: The rate of the ramp will be the overspeed rate.
User Level: Service and
overspeed test enabled
Reset Max Speed
Command
Visibility: Always Reset the maximum speed reached since the last start or last
maximum speed reset.
User Level: Service
Released