Woodward 505HT, Инструкция по установке и эксплуатации

Страница: 123 / 199

Manual 35116 505HT for Pelton Turbines
Woodward 121
Remote Alarms Screen
The purpose of this screen is to configure the remote alarms.
There are six remote alarms available on the control. Above an explanation of the first remote alarm, the
other have the same configuration. The remote alarm will work only if one of the discrete inputs is
configured to it. If no discrete input is configured to remote alarm these configuration will have no effect.
Figure 4-44. Remote Alarms Screen
Table 4-35. Remote Alarms Screen Configuration Values
Function ALARM
Visibility: Always Choose if the specific remote alarm is an alarm or shutdown.
CONFIGURATION MODE REQUIRED User Level: Configure
Delay
0.0 (0.0, 100.0) s
Visibility: Always Delay time for the specific remote alarm.
User Level: Service
Description
REMOTE FAULT 1
Visibility: Always Write the description of the alarm. This description will appear in
the Alarm or shutdown page when this alarm / shutdown occurs.
User Level: Service
Configured in
Monitor
Visibility: Always It shows if the remote alarm is configured for any discrete input
or if it is not in use (not configured in any discrete input).
User Level: Monitor
The operator can navigate between the remote alarm screens pressing the soft keys with arrows to left or
right.
Released