Woodward 2301D, Инструкция по установке и эксплуатации, Страница: 67 / 130

Manual 26247 2301D/2301D-EC Digital Control
Woodward 59
U**DISPLAY PID PARAMETERS**
This is a display of the input to the PID control. The values entered in the
Dynamic tuning section are normalized values and the values displayed here can
be used for stability analysis if needed.
01 DYNAMICS 2 ENABLED (Monitor)
indicates the system is in the isochronous mode (CB aux is closed) and
Dynamics 2 values are input to the PID controller.
02 PID GAIN VALUE (Monitor)
is the proportional value into the PID.
03 PID INTEGRAL GAIN VALUE (Monitor)
is the Integral value into the PID, Reset rate.
04 PID SDR VALUE (Monitor)
is the derivative or lead term into the PID.
V**ANALOG IN/OUTPUT CALIB**
01 AnIN 1, Offset dflt = 0.000 (-100.00, 100.00)
Sets the offset of analog input 1.
02 AnIN 1, Gain dflt = 1.000 (0.00, 10.00)
Sets the gain for analog input 1.
03 AnIN 1, mA / Volt (Monitor)
Shows the actual input value for input 1.
04 AnIN 2, Offset dflt = 0.000 (-100.00, 100.00)
Sets the offset of analog input 2.
05 AnIN 2, Gain dflt = 1.000 (0.00, 10.00)
Sets the gain for analog input 2.
06 AnIN 2, mA / Volt (Monitor)
Shows the actual input value for input 2.
07 Actuator, Offset dflt = 0.000 (-100.00, 100.00)
Sets the offset for the actuator output.
08 Actuator, Gain dflt = 1.000 (-100.00, 100.00)
Sets the gain for actuator output.
09 Actuator output (Monitor)
Shows the actual output value of the actuator.
10 Anout 4 -20 mA, Offset dflt = 0.000 (-100.00, 100.00)
Sets the offset of analog output.
11 Anout 4 -20 mA, Gain dflt = 1.000 (-100.00, 100.00)
Sets the gain of analog output.
12 Anout 4 -20 mA, output (Monitor)
Shows the actual output value.