Woodward 2301D, Инструкция по установке и эксплуатации, Страница: 122 / 130

2301D/2301D-EC Digital Control Manual 26247
114 Woodward
SERVICE MENU
PROGRAMMED
VALUE DEFAULT
VALUE TUNABLE RANGE
MIN. MAX.
06 DISCRETE OUTPUT #2 Monitor
07 TURN ON DO3 FALSE TRUE FALSE
08 DISCRETE OUTPUT #3 Monitor
09 TURN ON DO4 FALSE TRUE FALSE
10 DISCRETE OUTPUT #4 Monitor
11 TURN ON CB AUX RELAY FALSE TRUE FALSE
12 LOAD SHARE RELAY Monitor
13 ADJUST ANALOG OUTPUT (%) 0.000 0.00 100.00
14 ANALOG OUT (%) Monitor
15 ADJUST ACTUATOR OUT (%) 0.000 0.00 100.00
16 ACTUATOR OUTPUT (mA) Monitor
T**KW INPUT CALIBRATION**
01 KW INPUT CALIBRATN ZERO 0.000 -20.00 20.00
02 KW INPUT CALIBRATN GAIN 13.000 5.00 40.00
03 GEN OUTPUT (READ KW) Monitor
04 LOAD SIGNAL OUT (VDC) Monitor
U**DISPLAY PID PARAMETERS**
01 DYNAMICS 2 ENABLED Monitor
02 PID GAIN VALUE Monitor
03 PID INTEGRAL GAIN VALUE Monitor
04 PID SDR VALUE Monitor
V**ANALOG IN/OUTPUT CALIB**
01 AnIN 1, Offset 0.000 -100.00 100.00
02 AnIN 1, Gain 1.000 0.00 10.00
03 AnIN 1, mA / Volt Monitor
04 AnIN 2, Offset 0.000 -100.00 100.00
05 AnIN 2, Gain 1.000 0.00 10.00
06 AnIN 2, mA / Volt Monitor
07 Actuator, Offset 0.000 -100.00 100.00
08 Actuator, Gain 1.000 -100.00 100.00
09 Actuator output Monitor
10 Anout 4 -20 mA, Offset 0.000 -100.00 100.00
11 Anout 4 -20 mA, Gain 1.000 -100.00 100.00
12 Anout 4 -20 mA, output Monitor
W**LOADPULSE SETTINGS**
01 ENABLE LOADPULSE FALSE TRUE FALSE
02 SCALE LOADPULSE 1.000 0.01 10.00
03 LOW LVL ON -50.000 -10000.00 10000.00
04 HI LVL ON 50.000 -10000.00 10000.00
05 OFFSET 0.000 -100.00 100.00
06 RATE TO SP 10.000 0.00 100.00
07 SUBTR FRM SP -50.000 -100.00 100.00
08 ADD TO SP 50.000 -100.00 100.00
X**APPLICATION INFO**
01 APP SOFTWARE NUMBER Monitor
02 APP SOFTWARE REVISION Monitor
03 APPLICATION NAME Monitor
Y**COMM PORT (MODBUS)**
01 PORT FAIL Monitor
02 LINK ERROR Monitor
03 ERROR PERCENT Monitor
04 ERROR NUMBER Monitor
05 BAUD RATE 10 1 10
06 BAUD RATE IS SET FOR Monitor
07 DATA BITS 2 1 2
08 DATA BITS ARE SET FOR Monitor
09 STOP BITS 1 1 3
10 STOP BITS ARE SET FOR Monitor
11 PARITY 1 1 3
12 PARITY IS SET FOR Monitor
13 DRIVER 1 1 2