Wilo Stratos GIGA2.0-D, Инструкция по установке и эксплуатации

Страница: 247 / 552

Faults, causes and remedies en
Installation and operating instructions Wilo-Stratos GIGA2.0-I, Wilo-Stratos GIGA2.0-D 247
Diagnostics help Description Display
Overview of hydraulic
data Overview of current hydraulic
operating data. • Actual delivery head
• Actual volume flow
• Actual speed
• Actual fluid temperature
• Active restriction
Example: max. pump char-
acteristic curve
Overview of electrical
data Overview of current electrical
operating data. • Mains voltage
• Power consumption
• Consumed energy
• Active restriction
Example: max. pump char-
acteristic curve
• Operational hours
Overview of analogue
input (AI1) Overview of settings
e.g. type of use
differential pressure sensor,
signal type 2 ... 10 V
• Type of use
• Signal type
• Function
1)
Overview of analogue
input (AI2) e.g. type of use
differential pressure sensor,
signal type 4 ... 20 V for con-
trol mode index circuit evalu-
ator Δp-c • Type of use
• Signal type
• Function
1)
Overview of analogue
input (AI3) e.g. type of use
temperature sensor,
signal type PT1000 for con-
trol mode ΔT-c • Type of use
• Signal type
• Function
1)
Overview of analogue
input (AI4) e.g. type of use
temperature sensor,
signal type PT1000 for con-
trol mode ΔT-c • Type of use
• Signal type
• Function
1)
SSM relay forced control Forced control of the SSM re-
lay
in order to check the relay
and electrical connection.
• Normal
• Forced active
• Forced inactive
2)
SBM relay forced control Forced control of the SBM re-
lay,
in order to check the relay
and electrical connection.
• Normal
• Forced active
• Forced inactive
2)
Device information Display of different device in-
formation. • Pump type
• Article number
• Serial number
• Software version
• Hardware version
Manufacturer contact Display of contact data of the
factory customer service. • Contact data
Table 54: Selection options – Diagnostics help
1)
For information about type of use, signal type and functions, see “Application and
function of the analogue inputs AI1 ... AI 4” [ } 219] section.
2)
See “SSM/SBM relay forced control” [ } 215] section.
18.3 Error messages
Displays an error message on the display
ƒ
The status display will be in red colour.
ƒ
Error message, error code (E...), cause and remedy are described as text.
The pump is not operational if an error has occurred. If the pump identifies as part of
permanent monitoring that the cause of the error no longer applies, the error mes-
sage is revoked and operation resumes.