Wilo Stratos GIGA2.0-D, Инструкция по установке и эксплуатации

Страница: 175 / 552

Installation of Wilo-Smart Connect module BT en
Installation and operating instructions Wilo-Stratos GIGA2.0-I, Wilo-Stratos GIGA2.0-D 175
Fig. 25: Electronic module
The graphic display can be turned in 90° steps. To do this, open the upper part of the
electronic module using a screwdriver.
The graphic display is fixed in position by two snap-in hooks.
1. Carefully open the snap-in hooks (Fig. 25) with a tool (e.g. screwdriver).
2. Turn the graphic display to the desired position.
3. Fix the graphic display with the snap-in hooks.
4. Fit the upper part of the module again. Observe the screw tightening torques on
the electronic module.
Component Fig./Item screw
(nut) Thread Tightening
torque
[Nm] ±10 %
(unless other-
wise stated) Installa-
tion in-
formation
Electronic module
upper part Fig. 25, Item 1
Fig. I, Item 2
M5 4.5
Threaded cable
gland union nut Fig. 18, Item 1 M25 11 *
Threaded cable
gland Fig. 18, Item 1 M25x1.5 8 *
Threaded cable
gland union nut Fig. 18, Item 6 M20x1.5 6 *
Threaded cable
gland Fig. 18, Item 6 M20x1.5 5
Power terminals and
control terminals Fig. 20 Pusher Slot 0.6x3.5 **
Earthing screw Fig. 19, Item 5 M5 4.5
CIF module Fig. 25, Item 4 PT 30x10 0.9
Cover Wilo-
Smart Connect
Module BT Fig. 27 M3x10 0.6
Table 14: Tightening torques for electronic module
* Tighten when installing the cables.
** Press with screwdriver to plug and unplug the cable.
8 Installation of Wilo-Smart
Connect module BT
Fig. 26: Wilo-Smart Connect Module BT
The Bluetooth interface Wilo-Smart Connect Module BT (Fig. 25, Item 3, and Fig. 26) is
used to connect to mobile end devices such as smartphones and tablets. Using the
Wilo-Smart Connect app, you can operate and adjust the pump and read out pump
data. For settings, see “Commissioning” [
}
176] section.
Technical data
ƒ
Frequency band: 2400 MHz ... 2483.5 MHz
ƒ
Maximum radiated transmission power: < 10 dBm (EIRP)