Wallace Perimeter Security ALPHA, Руководство по установке и обслуживанию

Страница: 166 / 182

166
wallaceperimetersecurity.com
Phone: 866.300.1110
KINETIC SCHEMATICS
set to 2, and the Menu button is pressed, the LCD display will read Level 0 - 7 Call Level. If the call strength
on the display appears as a level 4 or less, consider increasing the sensitivity level by adjusting the rotary
switch on the HY5B detector.
Table 15. HY5B Vehicle Detector Call Level Display
Installer Menu LCD Description Setting Options
(Bold = Factory Settings)
ELD 0 EXIT LOOP SET 0 = Run Mode
1 = Show frequency
2 = Show call level 0-7
3 = Set Frequency
4 = Show Sensitivity
5 = Set Sensitivity
6 = Show Inductance
7 = Show Loop Health
8 = Set Presence
ILD 0 IN OBS LOOP SET
OLD 0 OUT OBS LOOP SET
CLD 0 CENTER LOOP SET
(Can be used as an
arming loop with
User Relay 22.)
Kinetic Schematics
On the following page, Figure 47 illustrates the schematic for the Kinetic DC 15W [Kinetic 1] and Kinetic DC
10FW [Kinetic 2]. Figure 48 shows the solar version.