Wallace Perimeter Security ALPHA, Руководство по установке и обслуживанию

Страница: 82 / 182

82
wallaceperimetersecurity.com
Phone: 866.300.1110
DISPLAY AND MENU OPTIONS
INITIAL SETUP
Once you’ve completed the installation of the Kinetic operator and attached the wired accessories, you’re
ready to program the operator. Two different approaches exist:
Display and Menu Options
This section of the manual provides information about the display and menu options. It includes how to:
• Turn both AC and DC power switches on.
• Review How to use the SmartDC Controller
Buttons in Menu Mode.
• Review Run Mode and Gate Status Displays
• Access and Configure User Menu Options
• Adjust the Close Timer
• Set the Time and Date
• Set the AC Power Loss Gate Function
• Adjust the Display Contrast
• Access and Configure Installer Menu Options
• Reset the OPEN & CLOSE Limits
• Set the Open and Close Gate Speed
• Adjust IES Sensitivity
• Reinstate Factory Defaults
• Enable Fire Department Access
This section describes what you will see on the display and explains the functionality of the buttons. User
and Installer Menu charts provide information about peripheral connections and the corresponding menu
items that need to be configured.
Method 1:
Connect a laptop computer to the USB or serial
(RS-232) port and upload the gate settings and set
the operator menu configurations via the S.T.A.R.T.
software.
Use a laptop computer at your place of
business to conveniently download the
free S.T.A.R.T. software from https://
hysecurity.com/ before heading out
into the field. This makes it easy
to adjust settings using a laptop. A
S.T.A.R.T. User Guide is also available
online.
Method 2:
Manually navigate through the User and Installer
Menus using the five buttons located under the
LCD display on the SmartDC Controller. The
instructions for performing this second option
are provided in this section.