Wallace Perimeter Security ALPHA, Руководство по установке и обслуживанию

Страница: 61 / 182

Alpha/Delta (Kinetic Operator) Installation and Maintenance Manual Revision 1 - MAY 2023
61
OPERATOR INSTALLATION AND GATE ADJUSTMENTS
Connecting the Battery and Turning DC Power ON
1. Connect the red battery wire to its spade terminal. See Figure 10.
2. Turn DC power ON. The USAGE CLASS appears when power is first supplied to the operator.
3. To navigate within the Setup Menu, use the SELECT, NEXT and PREV buttons as shown in Table 1.
Programming the Initial Setup Menu
Several sequential displays present information which must be configured before the Kinetic operator will
function. Once the configuration is complete, the information is retained even when a power loss occurs.
Table 1. Menu Mode Navigational Buttons
To edit the menu
To navigate through
the SELECTIONS
To choose what is on
the display
To navigate between
menus
Press SELECT.
Two top characters
blink.
Press NEXT.
Continue pressing NEXT
to view all selections.
Press SELECT.
Blinking characters
become static.
Press NEXT or PREV.
Advance – Press NEXT.
Previous – Press PREV.
NOTE: Programming the Setup Menu is usually a one-time occurrence unless factory defaults are
reinstated through the Installer Menu. The RESET and MENU buttons do not function during the initial
configuration of the Setup Menu.
Figure 10. Connecting Battery