Alpha/Delta (Kinetic Operator) Installation and Maintenance Manual
Revision 1 - MAY 2023
107
INSTALLER MENU FUNCTIONS
Table 6. SmartDC Controller - Installer Menu Functions
Ref.
No�
Installer Menu
Setting Options
(
Bold
= Factory Settings)
Menu Tasks and Explanations
Associated
DC Controller
Connections
Display
5
MN 0
MODEL NUMBER
0 = model type unknown
1 = Model <x>
2 = Model <x>
Select the type of gate operator model
used at the site. This menu item is used
when changing a circuit board.
Note: This menu item only appears,
if applicable, when you set the OT
(operator type).
(N/A)
6
WT 0
GATE WEIGHT (LB)
0 = Gate disabled
DC 15
DC 10F
0-400 lbs
0-250 lbs
401-800 lbs
251-500 lbs
801-1100 lbs 501-750 lbs
1101-1500 lbs 751-1000 lbs
Select the gate’s weight range in pounds.
The installer must designate the gate’s
weight before the operator will function.
See
“Programming the Initial Setup
. Designating the
correct gate weight allows the operator to
determine the appropriate acceleration
and deceleration rates.
(N/A)
7
OS 1
OPEN SPEED
DC 15
DC 10F
0 = 0.75ft/s 4 = 1.75ft/s
1 = 1.0ft/s
5 = 2.0ft/s
2 = 1.25ft/s 6 = 2.25ft/s
Designate how quickly the gate opens.
The options available differ depending
on the Operator Type (OT). Kinetic has
two operator types: OT15 ≤ 1.25ft/s and
OT16 ≥ 1.75ft/s. Settings higher than 1 are
reserved for Usage Class 3 and 4.
Note: Kinetic DC15 [Kinetic 1] = OT 15
and Kinetic DC10F [Kinetic 2] = OT16.
(N/A)
8
CS 1
CLOSE SPEED
DC 15
DC 10F
0 = 0.75ft/s 4 = 1.75ft/s
1 = 1.0ft/s
5 = 2.0ft/s
2 = 1.25ft/s 6 = 2.25ft/s
Designate how quickly the gate closes.
The options available differ depending
on the Operator Type (OT). Kinetic has
two operator types: OT15 ≤ 1.25ft/s and
OT16 ≥ 1.75ft/s. Settings higher than 1 are
reserved for Usage Class 3 and 4.
Note: Kinetic DC15 [Kinetic 1] = OT 15
and Kinetic DC10F [Kinetic 2] = OT16.
(N/A)
9
FD 0 (OFF)
FACTORY DEFAULTS
0 = user settings
1 = reload factory default
settings
Globally restores all menu settings back
to new operator status. Select setting 1 to
return the operator to factory defaults.
Note: If factory defaults are restored, the
UL usage class, handing, gate weight and
any other modified menu settings will
need to be configured again
.
(N/A)
Содержание ALPHA
