Wallace Perimeter Security ALPHA, Руководство по установке и обслуживанию

Страница: 100 / 182

100
wallaceperimetersecurity.com
Phone: 866.300.1110
ADJUSTING THE GATE SPEED
Adjusting the Gate Speed
To adjust gate speed, take the following steps:
1. At a gate status display, press the MENU
button twice. This accesses the User Menu
and the CLOSE TIMER display appears.
2. Simultaneously, press the OPEN and RESET
buttons to enter the Installer Menu. Release
the buttons and the LEARN LIMITS display
appears. It is the first item in the Installer
Menu.
3. Press NEXT until the OPEN SPEED (or CLOSE
SPEED) display appears. Select the desired
setting based on operator type.
Kinetic DC 15W - Kinetic 1 0 = 0.75 ft/s
1 = 1.00 ft/s
(Usage Class 3 & 4 only) 2 = 1.25 ft/s
Kinetic DC 10FW - Kinetic 2 4 = 1.75 ft/s
(The DC 10FW is designed
for Usage Class 3 & 4 only.)
5 = 2.00 ft/s
6 = 2.25 ft/s
NOTE: Certain speeds are allowed only when
the operator’s Usage Class is set appropriately.
4. Use the SELECT and NEXT buttons to navigate
and change the speed setting on the display.
5. To exit the Installer Menu, press the MENU
button. The gate status appears in the display
indicating you have returned to Run Mode.
2. Access the
User Menu by
pressing the
MENU button
twice.
3. Access
the Installer
Menu, by
simultaneously
pressing the
OPEN and
RESET buttons.
4. Use NEXT to
navigate to the
menu display.
Change the
setting using
the SELECT and
NEXT buttons.
1. Start at a gate
status display.